Industrial Air Coolers in Saudi Arabia

Two industrial air coolers in Saudi Arabia are shown here in their installed outdoor positions. Both units have top-mounted fans and electrical enclosures at the end of the frame. The site photos show how the coolers fit alongside surrounding equipment and pipework, with a closer view of the connections at the base of each unit.

Two industrial air coolers in Saudi Arabia with top-mounted fans and surrounding pipework
Overview of the two air coolers and the surrounding equipment area.

Project Overview

The two units are installed side by side in an outdoor equipment area. The wider view shows the fan arrangement and the relationship between the coolers and adjacent plant equipment. The second view shows the end-mounted electrical enclosures and the pipe connections near the base. Together, the photos illustrate why the unit orientation matters for both installation and routine service.

Airflow and Service Access

For similar installations, review both units together when checking airflow. Nearby structures, piping and equipment can affect the air entering the coolers. Leave room for air to reach the intake faces and for warm discharge air to clear the units. If warm air recirculates back into an intake, the cooler may have less capacity available at peak outdoor temperatures.

Lay out the piping and service routes at the same time. Keep the electrical enclosures and connection points accessible, and allow enough room to inspect and clean the air-intake surfaces after the surrounding pipework is installed.

Connection-side view of two outdoor air coolers showing electrical enclosures and base piping
Connection-side view showing the electrical enclosures and pipework near the base of each unit.

Air Cooler Selection for Hot Climates

Start with the required heat load, the target leaving-fluid temperature and the site’s peak design dry-bulb temperature. These values help determine whether dry operation can meet the required duty. Where the temperature difference between the fluid and the outdoor air is small, adiabatic pre-cooling can be evaluated alongside a dry-only design. The comparison should include water availability, water quality and maintenance access.

Discuss Your Air Cooling Project

Share your heat load, fluid type, flow rate, entering and leaving fluid temperatures, and a site layout with HACST. We can help you compare cooling options and identify the space needed for airflow, piping and service. Explore our dry and adiabatic coolers or request an equipment selection.



GET IN TOUCH

Call us at 86-536-6103201 or   Contact us
Top